Pinyin

From Freepedia

Chinese language romanization

Mandarin

For Standard Mandarin
    EFEO
    Gwoyeu Romatzyh
    Hanyu Pinyin
    Latinxua Sinwenz
    Lessing-Othmer
    Mandarin Phonetic Symbols II
    Postal System Pinyin
    Tongyong Pinyin
    Wade-Giles
    Yale

Cantonese

For Standard Cantonese
    Barnett-Chao
    Canton
    Hong Kong Government
    Jyutping
    Meyer-Wempe
    Sidney Lau
    Yale

Min Nan

For Hainanese
    Hainanhua Pinyin Fang'an
For Taiwanese
    Pe̍h-oē-jī
For Teochew
    Peng'im

Hakka

For Moiyan dialect
    Kejiahua Pinyin Fang'an

Universal
   General Chinese

Pinyin (Chinese: 拼音, pīnyīn) literally means "join (together) sounds" (a less literal translation being "phoneticize", "spell" or "transcription") in Chinese and usually refers to Hànyǔ Pīnyīn (汉语拼音, literal meaning: "Han language pinyin"), which is a system of romanization (phonemic notation and transcription to Roman script) for Standard Mandarin. Pinyin was approved in 1958 and adopted in 1979 by the government in the People's Republic of China. It superseded older transcriptions like the Wade-Giles system (1859; modified 1912) or Bopomofo. Similar systems have been designed for other Chinese spoken variants and non-Han minority languages in the PRC.

Since then, pinyin has been accepted by the Government of Singapore, the Library of Congress, the American Library Association, and most international institutions as the preferred transcription system for Mandarin. In 1979 the International Organization for Standardization (ISO) adopted pinyin as the standard romanization for modern Chinese.

It is important to maintain the distinction that pinyin is a romanization and not an anglicization; that is, it is equally applicable for transcription into any language that uses a Roman alphabet, but that the precise pronunciation need not match that of any of these languages. For example, the sounds indicated in pinyin by b and p are distinguished from each other (by aspiration) in a manner different from that of both English (which has voicing and aspiration) and of French (which has voicing alone). Other letters, like j or q indicate a combination of sounds that do not correspond to any exact sound in English. Some of the transcriptions in pinyin such as the ang ending, do not correspond to English pronunciations, either. Pinyin has also become a useful tool for entering Chinese language text into computers.

Contents

Pronunciation

Note: This page contains
IPA phonetic symbols
in Unicode.

The primary purpose of pinyin in Chinese schools is to teach Mandarin pronunciation. Many in the West are under the mistaken belief that pinyin is used to help children associate characters with spoken words which they already know, but this is incorrect as many Chinese do not use Mandarin at home, and therefore do not know the Mandarin pronunciation of words until they learn them in elementary school through the use of pinyin.

Pinyin uses the Roman alphabet, hence the pronunciation is relatively straightforward for Westerners. A pitfall for English-speaking novices is, however, the unusual pronunciation x, q, c and z (and sometimes i) and the unvoiced pronunciation of d, b, g, j. More information on the pronunciation of all pinyin letters in terms of English approximations is given further below.

The pronunciation of Chinese is generally given in terms of initials and finals, which represent the segmental phonemic portion of the language. Initials are initial consonants, while finals are all possible combinations of medials (semivowels coming before the vowel), the nucleus vowel, and coda (final consonant).

Initials

In each cell below, the first line indicates IPA, the second indicates pinyin.

Bilabial Labio-
dental 		Alveolar Retroflex Alveolo-
palatal 		Velar
Plosive [p]
b 		[pʰ]
p 		[t]
d 		[tʰ]
t 		[k]
g 		[kʰ]
k
Nasal [m]
m 		[n]
n
Fricative [f]
f 		[s]
s 		[ʂ]
sh 		[ʐ] *
r 		[ɕ]
x 		[x]
h
Affricate [ts]
z 		[tsʰ]
c 		[tʂ]
zh 		[tʂʰ]
ch 		[tɕ]
j 		[tɕʰ]
q
Lateral approximant [l]
l
Approximant [ɻ] *
r

* [ʐ] and [ɻ] are interchangeable.

Conventional order is: b p m f d t n l g k h j q x zh ch sh r z c s

Finals

In each cell below, the first line indicates IPA, the second indicates pinyin for a standalone (no-initial) form, and the third indicates pinyin for a combination with an initial. It is of interest to point out that there is no m finals in Mandarin. Other than finals modified by an -r, which are omitted, the following is an exhaustive table of all possible finals. 1

NucleusCodaMedial
Ø iuy
aØ[ɑ]
a
-a		[iɑ]
ya
-ia		[uɑ]
wa
-ua
i[aɪ]
ai
-ai		 [uaɪ]
wai
-uai
u[aʊ]
ao
-ao		[iaʊ]
yao
-iao
n[an]
an
-an		[iɛn]
yan
-ian		[uan]
wan
-uan		[yɛn]
yuan
-üan 2
ng[ɑŋ]
ang
-ang		[iɑŋ]
yang
-iang		[uɑŋ]
wang
-uang
əØ[ɤ]
e
-e		[iɛ]
ye
-ie		[uɔ]
wo
-uo/-o 3		[yɛ]
yue
-üe 2
i[eɪ]
ei
-ei		 [ueɪ]
wei
-ui
u[ɤʊ]
ou
-ou		[iɤʊ]
you
-iu
n[ən]
en
-en		[in]
yin
-in		[uən]
wen
-un		[yn]
yun
-ün 2
ng[ɤŋ]
eng
-eng		[iɤŋ]
ying
-ing		[uɤŋ] 4
weng
-ong		[yʊŋ]
yong
-iong
Ø[z̩]

-i		[i]
yi
-i		[u]
wu
-u		[y]
yu
-ü 2

1 /ər/ (而, 二, etc.) is written as er. For other finals formed by the suffix -r, pinyin does not use special orthography; one simply appends -r to the final that it is added to, without regard for any sound changes that may take place along the way. For information on sound changes related to final -r, please see Standard Mandarin.
2 "ü" is written as "u" after j, q, or x.
3 "uo" is written as "o" after b, p, m, or f.
4 It is pronounced [ʊŋ] when it follows an initial, and pinyin reflects this difference.

In addition, ê [ɛ] is used to represent certain interjections.

Rules given in terms of English pronunciation

All rules given here in terms of English pronunciation are approximate.

Pronunciation of initials

PinyinIPAExplanation
p [pʰ] as in English
t [tʰ] as in English
k [kʰ] as in English
b [p] unaspirated p, as in spit
d [t] unaspirated t, as in stand
g [k] unaspirated k, as in skill
s [s] as in sun
c [tsʰ] like ts, aspirated (more common example is cats)
z [ts] unaspirated c (halfway between beds and bets), (more common example is suds)
x [ɕ] like sh, but take the sound and pass it backwards along the tongue until it is clear of the tongue tip; very similar to the final sound in German ich, Portuguese enxada, luxo, xícara, puxa, and to huge or Hugh in some English dialects
q [tɕʰ] like church; pass it backwards along the tongue until it is free of the tongue tip
j [tɕ] like q, but unaspirated. (To get this sound, first take the sound halfway between joke and check, and then slowly pass it backwards along the tongue until it is entirely clear of the tongue tip.) While this exact sound is not used in English, the closest match is the j in ajar, not the s in Asia; this means that "Beijing" is pronounced like "bay-jing", not like "beige-ing".
sh [ʂ] as in shinbone, but with the tongue curled upwards; very similar to undershirt in American English
ch [tʂʰ] as in chin, but with the tongue curled upwards; very similar to nurture in American English, but strongly aspirated
zh [tʂ] ch with no aspiration (take the sound halfway between joke and church and curl it upwards); very similar to merger in American English, but not voiced
f [f] as in English
h [x] like the English h if followed by "a"; otherwise it is pronounced more roughly (not unlike the Scots ch)
l [l] as in English
r [ʐ] or [ɻ] similar to the English r in rank, but with the lips spread and with the tongue curled upwards
w [w] as in English, but many people pronounce it as in German w; not pronounced at all if followed by u
y [j] as in English; not pronounced at all if followed by "i" or "ü"
m [m] as in English
n [n] as in English

Pronunciation of finals

The following is an exhaustive list of all finals, with or without final -r.

To find the pronunciation of a final:

  1. Look for the entire combination rather than the individual letters. For example, look for ian, not i + a + n.
  2. For syllables starting with y- or w-, change the y- to i- and w- to u-, then take the i- and u- as part of the final. (E.g. yan -> ian, where "ian" is the final.) If this results in ii-, uu-, and iu-, change those to i-, u-, and ü- respectively. (E.g. yin -> in, wu -> u, yue -> üe)
  3. If the initial is j-, q-, and x-, and the final starts with -u-, then change the -u- to -ü-.
PinyinIPAExplanation
a [ɑ] if ending a syllable, then as in "father"
ai [aɪ] like English "eye", but a bit lighter
an [an] starts with plain continental "a" (AuE and NZE bud) and ends with "n"
ang [ɑŋ] as in German Angst, including the English loan word angst (starts with the vowel sound in father and ends in the velar nasal; like song in American English)
ar, anr, air [aɻ] like a, but pronounced with the tongue curled up against the palate; like rhotic are in North American English
angr [ɑ̃ɻ] same as ar but nasalized (i.e., the sound goes through the nose as well)
ao [ɑʊ] approximately as in "cow"; the a is much more audible than the o
aor [ɑʊɻ] like ao but with an -r added to the back; comparable to American tower (but much more compact)
e [ɤ], [ə] when occurring at the end of a syllable and not in the combinations of ie, üe, ue, then a backward, unrounded vowel, which can be formed by first pronouncing a plain continental "o" (AuE and NZE law) and then spreading the lips without changing the position of the tongue. That same sound is also similar to English "duh", but not as open. Many unstressed syllables in Chinese use the schwa (idea), and this is also written as e.
ê [ɛ] as in "bet". Only used in certain interjections.
ei [ei] as in "hey"
en [ən] as in "taken"
eir, enr [ɝ] like e, but pronounced with the tongue curled up against the palate; similar to the vowel in rhotic her in English
eng [ɤŋ] like e above but with ng added to it at the back
er [aɻ], [ɤɻ] if occurring not as a result of the suffix -r (e.g. 而, 二), then like ar; if occurring as a result of the suffix -r (e.g. 歌儿, 车儿), then like e but with an -r added at the end. see also ier, uer, üer
engr [ɤ̃ɻ] like er but nasalized
i [i] like English "ee", except when preceded by "c", "ch", "r", "s", "sh", "z" or "zh"; in these cases it should be pronounced as a natural extension of those sounds in the same position, but slightly more open to allow for a clear-sounding vowel to pass through
ia [iɑ] like English "yard"
ian [iɛn] like English yen
iang [iɑŋ] as i + ang
iao [iɑʊ] as i + ao
iar, ianr [iaɻ] as i + ar
iangr [iɑ̃ɻ] as i + angr
iaor [iɑʊɻ] as i + aor
ie [iɛ] the initial i sounds like English "ee", but is very short; e (pronounced like ê) is pronounced longer and carries the main stress (similar to the initial sound in yet)
ier [iɛɻ] "ie" with -r added
iu [iou̯] as i + ou
iur [iou̯ɻ] as i + our
o [u̯ɔ] same as uo (used instead of uo after b, p, m, f)
or [u̯ɔɻ] same as uor (used instead of uo after b, p, m, f)
ong [ʊŋ] starts with the vowel sound in book and ends with the velar nasal sound in sing
ongr [ʊ̃ɻ] The same vowel as ong, but with an -r added and nasalized.
ou [ou̯] as in "so"
our [ou̯ɻ] take ou and add -r. The sound should be compact.
u [u] like English "oo"
uai [uaɪ] pronounced as u + ai
uan [uan] pronounced as u + an
uar, uanr, uair [uaɻ] as u + ar
uangr [uɑ̃ɻ] as u + angr
ui [ueɪ] here, the i is pronounced like ei
un [uən] pronounced as u + en
uir, unr [uɝ] as u + eir
uo [u̯ɔ] starts with English "oo" and ends with the sound in law. The u is pronounced shorter and lighter than the o
uor [u̯ɔɻ] as uo + r
ü [y] as in German "üben" or French "lune" (To get this sound, say "ee" with rounded lips)
üan [yɛn] like English yen, but the beginning sound is ü
üe [yɛ] e is pronounced like ê, the ü is short and light
üer [yɛɻ] "üe" with -r added
ün [yn] ü (given above) plus final n

Orthographic features

Pinyin differs from other romanizations in several aspects, such as:

  • w is placed before syllables starting with u.
  • y is placed before syllables starting with i and ü.
  • ü is written as u when there is no ambiguity (such as ju, qu, and xu), but written as ü when there are corresponding u syllables (such as lü and nü)
  • When preceded by a consonant, iou, uei, and uen are simplified as iu, ui, and un (which do not represent the actual pronunciation).
  • Like zhuyin, what are actually pronounced as buo, puo, muo, and fuo are given a separate representation: bo, po, mo, and fo.
  • The apostrophe (') is used before ɑ, o, and e to separate syllables in a word where ambiguity could arise, e.g., pi'ao (皮襖) vs. piao (票), and Xi'an (西安) vs. xian (先).
  • Eh! alone is written as ê; elsewhere as e. Schwa is always written as e.
  • zh, ch, and sh can be abbreviated as ẑ, ĉ, and ŝ. However, the shorthands are rarely used due to difficulty of entering them on computers.
  • ng has the uncommon shorthand of ŋ.

Tones

Image:Pinyin Tone Chart.png

The Pinyin system also incorporates suprasegmental phonemes to represent the four tones of Mandarin. Each tone is indicated by a diacritical mark above a non-medial vowel. Many books printed in China mix fonts, with vowels with tone marks rendered in a different font than the surrounding text, a practice that tends to give such Pinyin texts a typographically ungainly appearance. This style, most likely rooted in early technical limitations, has led many to believe that Pinyin's rules call for this practice and also for the use of "ɑ" (with no curl over the top) rather than the standard style of the letter "a" found in most fonts. The official rules of Hanyu Pinyin, however, specify no such practice. Note that tone marks can also appear on consonants in certain vowelless exclamations.

  1. The first tone is represented by a macron (ˉ) added to the pinyin vowel:

    (ɑ̄) ā ē ī ō ū ǖ Ā Ē Ī Ō Ū Ǖ
  2. The second tone is denoted by an acute accent (ˊ):

    (ɑ́) á é í ó ú ǘ Á É Í Ó Ú Ǘ
  3. The third tone is symbolized by a caron (ˇ, also known as a reverse circumflex). Note, it is officially not a breve (˘, lacking a downward angle), although this misuse is somewhat common on the Internet.

    (ɑ̌) ǎ ě ǐ ǒ ǔ ǚ Ǎ Ě Ǐ Ǒ Ǔ Ǚ
  4. The fourth tone is represented by a grave accent (ˋ):

    (ɑ̀) à è ì ò ù ǜ À È Ì Ò Ù Ǜ
  5. The fifth or neutral tone is represented by a normal vowel without any accent mark:

    (ɑ) a e i o u ü A E I O U Ü
(In some cases, this is also written with a dot before the syllable; for example, ·ma.)

Since most computer fonts do not contain the macron or caron accents, a common convention is to postfix the individual syllables with a digit representing their tone (e.g., "tóng" (tong with the rising tone) is written "tong2"). The digit is numbered as the order listed above, except the "fifth tone", which, in addition to being numbered 5, is also either not numbered or numbered zero, as in ma0 (吗/嗎, an interrogative marker).

These tone marks normally are only used in Mandarin textbooks or in foreign learning texts, but they are essential for correct pronunciation of Mandarin syllables, as exemplified by the following classical example of five characters whose pronunciations differ only in their tones:

妈(mā) 麻(má) 马(mǎ) 骂(mà) 吗(·ma)

Image:Gnome-speakernotes.png mā má mǎ mà (info)
A sound sample of the four tones
Problems listening to the file? See media help.


The words are "mother", "hemp", "horse", "admonish" and a question particle, respectively.

Rules for placing the tone mark

The rules for determining on which vowel the tone mark appears are as follows:

  1. If there is more than one vowel and the first vowel is i, u, or ü, then the tone mark appears on the second vowel.
  2. In all other cases, the tone mark appears on the first vowel

(y and w are not considered vowels for these rules.)

The reasoning behind these rules is in the case of diphthongs and triphthongs, i, u, and ü (and their orthographic equivalents y and w when there is no initial consonant) are considered medial glides rather than part of the syllable nucleus in Chinese phonology. The rules ensure that the tone mark always appears on the nucleus of a syllable.

Miscellanea

An umlaut is placed over the letter u when it occurs after the initials l and n in order to represent the sound [y]. This is necessary in order to distinguish the front high rounded vowel in lü (e.g. 驴/驢 donkey) from the back high rounded vowel in lu (e.g. 炉/爐 oven). Tonal markers are added on top of the umlaut, as in lǘ.

However, the umlaut-u is not used in other contexts where it represents a front high rounded vowel, namely after the letters j, q, x and y. For example, the sound of the word 鱼/魚 (fish) is transcribed in pinyin simply as yú, not as yǘ. This practice is opposed to Wade-Giles, which always uses ü, and Tongyong Pinyin, which always uses yu. Whereas Wade-Giles needs to use the umlaut to distinguish between chü (pinyin ju) and chu (pinyin zhu), this ambiguity cannot arise with pinyin, so the more convenient form ju is used instead of jü. Genuine ambiguities only happen with nu/nü and lu/lü, which are then distinguished by an umlaut diacritic.

Many fonts or output methods do not support an umlaut for ü or cannot place tone marks on top of ü. Likewise, using ü in input methods is difficult because it is not present as a simple key on many keyboard layouts. For these reasons v is sometimes used instead by convention. Occasionally, uu (double u) or U (capital u) is used in its place.

See also:

Pinyin in Taiwan

The Republic of China on Taiwan is in the process of adopting a modified version of pinyin (currently Tongyong Pinyin). For elementary education it has used zhuyin (also known as bopomofo), and for romanization there is no standard system in general use in Taiwan despite many efforts to standardize on one system. In the late-1990s, the government of Taiwan formally decided to move from zhuyin to pinyin. This has triggered a very heated discussion of which pinyin system to use: hanyu pinyin of People's Republic of China or some other system.

Much of the controversy centers on issues of national identity because of political interests. Proponents for adopting pinyin maintain that it is an international standard that is already used throughout the world. Proponents for adopting a new system maintain that Taiwan should have its own identity and culture separate from the People's Republic of China.

A new system Tongyong Pinyin was created in Taiwan in 1998. Tongyong Pinyin is mostly similar to Hanyu Pinyin with a number of changes in the letters and digraphs representing certain sounds.

In October 2002, the ROC government adopted Tongyong Pinyin through an administrative order that local governments can override. Localities with governments controlled by the Kuomintang, most notably Taipei City, have overridden the order and converted to Hanyu Pinyin (although with a slightly different capitialization convention than the Mainland). As a result, English signs have inconsistent romanization in Taiwan, with many places using Tongyong Pinyin but some using Hanyu Pinyin, and still others not yet having had the resources to replace older Wade-Giles or MPS2 signage. This has resulted in the odd situation in Taipei City in which inconsistent pinyin are shown in freeway directions, with freeway signs, which are under the control of the national government, using one pinyin, but surface street signs, which are under the control of the city government, using the other.

As of 2003, no form of pinyin is used in elementary education on Taiwan to teach pronunciation. Although the ROC government has stated the desire to use romanization rather than zhuyin in education, the lack of agreement on which form of pinyin to use and the huge logistical challenge of teacher training has stalled these efforts.

Pinyin has officially been adopted in Taiwan in 2004. However, most international locations still use older systems, most notably Wade-Giles.

Other languages

Pinyin-like systems have been devised for other variants of Chinese. Guangdong Romanization is a set of romanizations devised by the government of Guangdong province for Cantonese, Teochew, Hakka (Moiyen dialect), and Hainanese. All of these are designed to use letters in a similar way to Pinyin.

In addition, in accordance to the "Regulation of Phonetic Transcription in Hanyu Pinyin Letters of Place Names in Minority Nationality Languages" (《少数民族语地名汉语拼音字母音译转写法 》) promulgated in 1976, place names in non-Chinese languages like Mongol, Uyghur, and Tibetan are also officially transcribed using Pinyin. The pinyin letters (26 Roman letters, ü, and ê) are used to approximate the non-Chinese language in question as closely as possible. This results in spellings that are different from both the customary spelling of the place name, and the Pinyin spelling of the name in Chinese:

Customary Official (Pinyin for local name) Pinyin for Chinese name
Shigatse Xigazê Rìkāzé
Urumchi Ürümqi Wūlǔmùqí

Controversy

Debate continues about the actual suitability of pinyin as a Chinese romanization method. This argument revolves around pinyin's unconventional use of Roman letters, of which the phonological values of some phonemes are quite different from that of most languages utilizing the Roman alphabet. Some sinologists praise this as pinyin's flexibility in that it allows the entire Roman alphabet to be adapted to the Chinese sound system (compared to Wade-Giles, which leaves out or underuses many letters). Others point out that pinyin letter values are so unconventional that for a person unfamiliar with Chinese, they result in a larger number of mispronunciations when compared to Wade-Giles. However, as not only the PRC but by now most institutions and publications have adopted it, the debate seems increasingly obsolete.

Pinyin, like all systems of romanization, has certain limitations that users should be aware of:

  • Like the spelling systems of any other language, pinyin does not represent English pronunciation and should not be pronounced according to English conventions. Readers are advised to learn pinyin phonetic conventions, bearing in mind that many sounds have no equivalents in English.
  • Chinese characters can indicate semantic cues. But since pinyin is based on the sounds of Mandarin alone, these semantic cues are no longer preserved. For speakers of other Chinese spoken variants, it becomes unsuitable for use in reading and writing because these sounds do not necessarily correspond to their speech.
  • The phonotactics of spoken Mandarin dictate a relatively small set of possible syllables and there is a potential for homonyms. Because of this, pinyin can be ambiguous, especially when transcribing Standard Written Chinese, which uses formal constructions not often found in speech. However, this should not be an issue in the transcription of normal spoken Mandarin conversation since speakers would not use such ambiguous constructions in speech.

Computer systems long provided the most convincing argument in favor of pinyin; early computers were able to display nothing but 7-bit ASCII (essentially the 26 letters, the 10 digits, and a handful of punctuation marks). Most contemporary computer systems are now able to readily display characters from not only Chinese, but from many other writing systems as well. In addition, multiple input method editors exist that use standard keyboards to type them (pinyin being one such method). Now, PDAs and digitizing tablets allow users to write characters with a stylus, which can then be stored and edited like any text. Thus, this justification is no longer as strong as it used to be.

Nonetheless, pinyin has gained wide acceptance, and supporters believe it is useful for students of Chinese as a second language.

Reference

Yin Binyong 尹斌庸, Mary Felley: Chinese Romanization. Pronunciation and Orthography (Hanyu pinyin he zhengcifa 汉语拼音和正词法; Sinolingua, Beijing 1990), ISBN 7-80052-148-6 / ISBN 0-8351-1930-0.

External links

Auto-converters

Other

Retrieved from "http://en.freepedia.org/Pinyin.html"


Views
Personal tools
In other languages
Similar Links